3D Printing With Mars Soil: Sulfur-Based Concrete Mixing

TL;DR

Did you know that future explorers might build their homes using the same smelly element found in matches and volcanic vents? Constructing a base on Mars is a massive puzzle because hauling heavy cement bags through space is too expensive. Engineers are looking at "Mars concrete" a clever mixture that uses the red dust under your boots as the primary building block. This material is a thermoplastic composite - It behaves more like a hot glue than the wet slush you see at construction sites on Earth. You do not need a single drop of liquid water to make it - this feature is vital because water is a rare, precious resource that astronauts must save for drinking or growing food.

3D Printing With Mars Soil: How Sulfur-Based Concrete Could Build Future Habitats

Scientists are investigating how to turn Martian soil into building materials by mixing it with sulfur and shaping the mixture with 3D printers. Unlike ordinary Portland cement concrete, sulfur-based concrete does not require water to harden. Laboratory studies using Mars soil simulants have demonstrated promising strength and printing performance, including one 2024 study that achieved a compressive strength of 27 megapascals with a mixture containing 70% simulated Martian soil and 30% sulfur. However, producing suitable sulfur on Mars, managing extreme temperatures, and proving long-term structural safety remain important challenges.

Summary

  • Technology: 3D printing with sulfur-based Martian concrete.

  • Main materials: Martian soil, also called regolith, and sulfur.

  • Primary advantage: The mixture can harden without water.

  • Research milestone: Laboratory testing has demonstrated 3D-printed samples made with high-fidelity Martian soil simulants.

  • Potential applications: Habitats, protective walls, equipment shelters, landing pads and other infrastructure.

  • Main challenge: Obtaining usable elemental sulfur and maintaining reliable material performance under Martian conditions.

  • Current status: Experimental research, not a proven construction system operating on Mars.

  • Long-term goal: Use local planetary resources to reduce the quantity of building materials that must be transported from Earth.

Why Mars Soil Could Become a Building Material

Esej: Jak moc rudá planeta? Filmové podoby Marsu mezi mýtem a vědou — ČT art — Česká televize
 

Building a settlement on Mars would require more than sending astronauts, food and scientific equipment. Future crews would also need protected living spaces, storage facilities, research areas and infrastructure capable of surviving a harsh environment.

Transporting every brick, concrete ingredient and construction component from Earth would add considerable mass to already demanding space missions. Researchers are therefore investigating in-situ resource utilization (ISRU), which means using resources available at the destination.

Mars has extensive deposits of loose surface material known as regolith. This material contains mineral particles that could serve as aggregate in construction materials. Instead of transporting all the raw building material from Earth, robots could collect and process suitable Martian soil at the construction site.

NASA has discussed planetary construction approaches that use local surface materials and automated manufacturing. These approaches include extrusion-based 3D printing and techniques that use energy to transform regolith into solid structures.

Sulfur-based concrete is one promising option because it could reduce dependence on water and conventional cement.

AutoSelf: Self-Consistency, the Missing Reliability Primitive - Ruslan Magana Vsevolodovna

How Sulfur-Based Concrete Works

Traditional concrete typically combines aggregate, cement and water. The cement reacts with water through a process called hydration, creating a hardened material. On Mars, obtaining and processing sufficient water for large-scale construction could be difficult and expensive.

Sulfur-based concrete works differently. Sulfur acts as a binding material that holds mineral particles together.

In a typical experimental process, researchers heat sulfur until it melts, mix it with processed Martian soil simulant, and shape the resulting material. As the mixture cools, the sulfur solidifies and binds the particles into a rigid structure.

A 2024 study published in Advances in Space Research investigated this approach using simulated Martian regolith and commercially available sulfur. The researchers reported that a mixture containing 70% regolith simulant and 30% sulfur reached a compressive strength of approximately 27 megapascals after 24 hours.

Mars X-House: Winner of 3D-Printed Habitat Challenge — Melodie Yashar

That result is encouraging, but it should not be mistaken for proof that a complete Martian building is ready for construction. The strength of a small laboratory sample is only one part of determining whether a material can support a real habitat.

How 3D Printing Could Build Structures on Mars

AutoSelf: Self-Consistency, the Missing Reliability Primitive - Ruslan Magana Vsevolodovna

Construction 3D printing builds objects by depositing material in successive layers. Instead of using bricks or conventional wooden formwork, a computer-controlled machine follows a programmed design and places material precisely where it is needed.

For a future Mars mission, a robotic construction system could perform several tasks:

  • Collect and prepare local regolith.

  • Process the sulfur needed for the binding material.

  • Heat and mix the ingredients under controlled conditions.

  • Pump the mixture through a printing nozzle.

  • Deposit successive layers to create walls and other structural components.

  • Monitor temperatures, dimensions and material strength during construction.

The advantage is that robots could prepare some infrastructure before astronauts arrive. This could reduce the amount of construction work required during crewed missions.

However, the printer would need to operate reliably in low atmospheric pressure, handle abrasive dust and function despite major temperature changes. Researchers must also determine how to control the bonding between printed layers.

Mars X-House: Winner of 3D-Printed Habitat Challenge — Melodie Yashar

What Recent Research Has Discovered

Research published in September 2024 in Automation in Construction demonstrated the feasibility of printing sulfur-regolith concrete using a high-fidelity Martian soil simulant.

The study found that printing temperature and the temperature of the underlying layer affected shape stability and bending strength. The researchers also investigated adding dicyclopentadiene, a chemical modifier abbreviated as DCPD, which increased strength by up to 44% in their experiments and reduced sulfur loss under vacuum conditions.

A further study published online on January 28, 2026, examined waterless sulfur-regolith printing materials under vacuum and changing temperatures. It reported promising performance compared with conventional Portland cement concrete samples under the tested conditions.

AutoSelf: Self-Consistency, the Missing Reliability Primitive - Ruslan Magana Vsevolodovna

These findings matter because a material must do more than become hard. It must retain its shape, bond properly between layers and remain dependable under the environmental conditions where it will be used.

Research findings at a glance

Research area

Finding

Why it matters

Material strength

A 2024 study reported 27 MPa compressive strength for a 70:30 regolith-simulant-to-sulfur mixture.

Suggests potential for structural applications.

Water requirements

Sulfur-based concrete can harden without water.

Reduces competition for scarce water resources.

Printing performance

Temperature affects shape stability and bending strength.

Printing conditions must be carefully controlled.

Vacuum exposure

Modified mixtures showed improved performance in laboratory testing.

Helps researchers assess suitability for Mars.

Automated construction

Robotic 3D printing can deposit material layer by layer.

Could reduce the need for human construction crews.

The Biggest Challenges of Using Mars Soil

Despite its promise, sulfur-based concrete is not yet ready to be treated as a proven building material for human settlements on Mars.

Obtaining usable sulfur: Sulfur compounds have been detected on Mars, but the sulfur needed as a binder must be available in a suitable chemical form. Much of the sulfur present in Martian materials occurs in sulfates and sulfides, so extracting elemental sulfur would require additional processing. Researchers must establish how efficiently this could be done using equipment and energy available on Mars.

10 Designs From NASA's Mars Habitat Challenge - Business Insider

Extreme environmental conditions: Mars experiences significant temperature changes, and its atmosphere is much thinner than Earth's. These conditions can affect how a printed structure cools, how its layers bond and how the material performs over time.

Sulfur loss: Laboratory research has identified sulfur sublimation under vacuum conditions as a potential concern. Sublimation occurs when a solid changes directly into a gas. If sulfur is lost from the material, its mechanical properties may change. More testing is needed to understand long-term performance.

Radiation and structural safety: A successful habitat must protect its occupants from radiation, temperature extremes and pressure differences. Sulfur-based concrete could potentially contribute to protective walls or outer structures, but engineers would still need to test complete designs, seals, joints and supporting systems.

Energy and maintenance: Heating sulfur, processing regolith and operating robotic printers require reliable power. Equipment must also withstand dust, mechanical wear and possible failures without depending on frequent deliveries from Earth.

Potential Applications for Future Mars Settlements

Space breakthrough: Scientists left stunned after new research reveals how humans could secure long-term survival on Mars

If the technology proves reliable, sulfur-based 3D printing could support several parts of a future settlement.

  • Habitat walls: Printed structures could provide part of the physical enclosure surrounding pressurized living modules.

  • Radiation protection: Regolith-based walls or protective coverings could help shield habitats when designed with adequate thickness and suitable structural support.

  • Landing pads: Constructed surfaces could help manage loose dust and provide more stable areas for spacecraft operations.

  • Equipment shelters: Robots could build protective enclosures for machinery, tools and scientific equipment.

  • Storage facilities: Printed structures could help organize supplies and separate equipment areas from living spaces.

These applications remain potential uses rather than confirmed deployments. In particular, a printed wall alone would not automatically create a safe, pressurized habitat.

References

  • Giwa, Ilerioluwa, et al. (2024). 3D Printed Sulfur-Regolith Concrete Performance Evaluation for Waterless Extraterrestrial Robotic Construction. Automation in Construction. Read the research

  • Snehal K., Priyanshu Sinha and Piyush Chaunsali (2024). Development of Waterless Extra-Terrestrial Concrete Using Martian Regolith. Advances in Space Research. Read the research

  • Barkatt, Aaron and Masataka Okutsu (2022). Obtaining Elemental Sulfur for Martian Sulfur Concrete. Read the research

  • Banijamali, Kasra, Ilerioluwa Giwa, Michael Fiske and Ali Kazemian (2026). Planetary Robotic Construction on the Moon and Mars Using Waterless Sulfur–Regolith Printing Materials. Read the research

  • NASA. NASA Enables Construction Technology for Moon and Mars Exploration. Read NASA's overview